top of page

The Lutz Auto Speedometer Calibrator can calibrate your speedometer to display the correct speed, compensating for any modification that affects the speedometer calibration (ie. tire size and gearing changes).

 

No complicated dip switches to deal with and zero latency issues. This kit is designed to be plug and play with Toyota Hilux KUN and GGN as well as 1st Gen Tacomas and 3rd Gen 4runners with electronic speedometers. NO WIRING MODIFICATIONS REQUIRED.

 

This calibrator works like this:

After installing, the speedometer calibrator will need to be adjusted properly by pressing the buttons. The key will need to be in the ON position (NOT ACC) while adjusting with engine OFF for safety. Each button press adjusts the speed by plus or minus 1/2%. Pressing and holding both up and down buttons for 10 seconds will reset the speed to factory setting. After adjustment is completed and the calibration is confirmed to be correct, reinstall the cap and sealing gasket.

 

The kit includes:

Lutz Auto Speedometer Correction Device

Sealed Case

Mounting Hardware

Detailed Instructions

 

Disclaimer: Lutz Auto is not responsible for miscalibration or malfunction of any speedometer/odometer

 

Fits:

-1st Gen Tacoma (95-04) with electronic speedometers

-Hilux KUN and GGN with electric speedometer

 

Note: some older years have cable driven speedometers. Make sure that you have an electronic drive speedometer/odometer.

 

 

 

 

 

Tags: Hilux, Tacoma, KUN, GGN, 1st Gen

Hilux/1st Gen Tacoma Speedometer Calibrator/Correction Device

SKU: LTZ-80-SCD
$118.95Price
    bottom of page